Metrohm tiamo 2.4 (process analysis) - Manual (Page 1464)

6.8 Subwindow Colorimetric sensors
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1448 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
c1
Calibration coefficient first-order.
c2
Calibration coefficient second-order.
c3
Calibration coefficient third-order.
Additional columns from the properties of the colorimetric sensors can be
displayed with the menu item Edit
▶ Column display....
NOTE
Lines that contain red entries will also show the line number with a red
background.
Table view
The table of the colorimetric sensors cannot be edited directly. With a click
on the column title the table can be sorted according to the selected col-
umn in either increasing or decreasing sequence. The table view can be
adapted with the left-hand mouse button as follows:
￭ Drag the margin between column titles:
Sets the column width
￭ Double-click on the margin between column titles:
Sets the optimal column width
￭ Drag the column title:
Moves the column to the required location
If the contents of a field is larger than the column width, then the whole
contents will be shown as a tooltip if the mouse cursor is kept on the
field.
Functions
The menu Edit beneath the table of the colorimetric sensors contains the
following menu items:
New... Add a new colorimetric sensor to the table (see Chapter 6.8.2.3, page 1449).
Delete Delete the selected colorimetric sensor (see Chapter 6.8.2.4, page 1450).
Properties... Edit the properties of the selected colorimetric sensor (see Chapter 6.8.3.1,
page 1450)