Metrohm tiamo 2.4 (process analysis) - Manual (Page 1604)

7.14 Avantes spectrometer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1588 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Method
Shows the method with which the correction spectrum was recorded.
Determination ID
ID of the determination in which the correction spectrum was recorded.
The determination ID can be copied and pasted into another field.
Integration time
Shows the integration time during recording of the correction spectrum.
Averaged spectra
Number of spectra that are recorded and averaged.
Smoothing
Shows the number of neighboring pixels with which the light intensity of
each pixel was determined.
Flash rate
Shows the number of flashes per second of a pulsed xenon lamp as light
source.
Spectrum
Shows the correction spectrum. The graph can be zoomed with the
mouse. You can display the whole spectrum again by double-clicking on
it.
x Axis
Shows the wavelength in nm.
y Axis
Shows the correction factors.
7.14.9 Properties - GLP
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ GLP
GLP test date
Date of the last GLP test. This date can be selected by clicking on in
the dialog window Select date (see Chapter 2.5.1, page 91).
Comment on GLP test
Comment on GLP test.
Entry 1000 characters