Metrohm tiamo 2.4 (process analysis) - Manual (Page 1428)

6.6 Subwindow Titrants/Solutions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1412 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
NOTE
Default values have already been entered for the tubing parameters;
these correspond to the dimensions of the standard tubing supplied. If
you do not make any modifications to the tubing connections then you
do not need to modify the tubing parameters. For information on
length and diameter of other tubing see Products/Accessories and
columns at
http://products.metrohm.com .
Dosing tip
Length
Length of the tubing connecting the stopcock to the dosing tip.
Input range 0.0 - 999.9 cm
Default value 40.0 cm
Diameter
Diameter of the tubing connecting the stopcock to the dosing tip.
Input range 0.0 - 9.9 mm
Default value 2.0 mm
Cylinder
Length
Length of the tubing connecting the stopcock to the cylinder.
Input range 0.0 - 999.9 cm
Default value 13.0 cm
Diameter
Diameter of the tubing connecting the stopcock to the cylinder.
Input range 0.0 - 9.9 mm
Default value 2.0 mm
Reagent bottle
Length
Length of the tubing connecting the stopcock to the reagent bottle.
Input range 0.0 - 999.9 cm
Default value 25.0 cm
Diameter
Diameter of the tubing connecting the stopcock to the reagent bottle.