Metrohm tiamo 2.4 (process analysis) User Manual
Page 1725
■■■■■■■■■■■■■■■■■■■■■■
8 Manual control
tiamo 2.4 (for Process Analysis)
■■■■■■■■
1709
End position
On this tab the position of the stepping motor can be modified manually,
it can be moved to the maximum end position.
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Status
Display of the current status.
Selection
ACTIVE | INACTIVE | ERROR
[>]
Sets the stepping motor to ACTIVE and moves in positive direction as
long as the button remains pressed or until an end position is reached.
[<]
Sets the stepping motor to ACTIVE and moves in negative direction as
long as the button remains pressed or until an end position is reached.
Absolute position
On this tab an absolute position can be moved to.
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Distance
Distance to be moved to.
Visible only in cases of stepping motors where Type = Linear drive.
Input range
-214783647 - 214783647 mm
Default value
0 mm