Metrohm tiamo 2.4 (process analysis) - Manual (Page 1433)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1417
Port
Port to be used as Dosing port 2.
Selection Port 1 | Port 2 | Port 3 | Port 4
Default value Port 3
Length
Length of tubing attached to Dosing port 2.
Input range 0.0 - 999.9 cm
Default value 0.0 cm
Diameter
Diameter of tubing attached to Dosing port 2.
Input range 0.0 - 9.9 mm
Default value 2.0 mm
Fill port
Port
Port to be used as Fill port for aspirating the solution.
Selection Port 1 | Port 2 | Port 3 | Port 4
Default value Port 2
Length
Length of tubing attached to Fill port.
Input range 0.0 - 999.9
Default value 25.0
Diameter
Diameter of tubing attached to Fill port.
Input range 0.0 - 9.9 mm
Default value 2.0 mm
Special port
Port
Port to be used as special port.
Selection Port 1 | Port 2 | Port 3 | Port 4
Default value Port 4