Metrohm tiamo 2.4 (process analysis) - Manual (Page 1266)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1250 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Message by E-mail
on | off (Default value: off)
If this option is enabled, the message defined in the text box will be sent
to the address defined under [E-mail] in the event that the result limits
are exceeded.
[E-mail]
Opens the dialog window Send E-mail for defining the E-mail parameters
(see Chapter 2.6.1, page 93).
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted in addition to
the message defined above when a limit is exceeded.
Action
Action
on | off (Default value: off)
If this option is enabled, one of the following actions will be executed in
the event that limit values are exceeded.
Selection Cancel determination | Stop determination
and series
Default value Cancel determination
Cancel determination
The determination is stopped and the next determination of the series
is started.
Stop determination and series
Both the determination and the series are stopped.
[Save as template]
Open the dialog window Save result template in order to save the
result parameters as template for the creation of new results (see Chapter
5.6.8.2.6.2, page 1253).
5.6.8.2.5.3 Result - Options
Tab: Method ▶ CALC ▶ Properties... ▶ [New] ▶ [Continue] ▶ Result - Options
The assignment of the result to a common variable, a global variable or a
titer can be activated on this tab.