Metrohm tiamo 2.4 (process analysis) - Manual (Page 1635)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1619
Sample size
Sample size.
Sample size unit
Sample size unit.
ID1
Sample identification ID1.
ID2
Sample identification ID2.
7.20 IO controller
7.20.1 IO controller - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
The properties of an IO controller are set on the following tabs:
￭ (see Chapter 7.20.2, page 1619)
General device information such as device name, device type, serial
number, etc.
￭ (see Chapter 7.20.3, page 1620)
General settings for the IO controller.
￭ (see Chapter 7.20.4, page 1621)
Digital inputs of the IO controller.
￭ (see Chapter 7.20.5, page 1625)
Digital outputs of the IO controller.
￭ (see Chapter 7.20.6, page 1628)
Analog inputs of the IO controller.
￭ (see Chapter 7.20.7, page 1630)
Analog outputs of the IO controller.
￭ Controllers
Controllers of the IO controller.
￭ (see Chapter 6.6.3.8, page 1419)
Information on GLP tests and GLP monitoring.
7.20.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
Device name
Name of device (can be freely defined by user).