Metrohm tiamo 2.4 (process analysis) - Manual (Page 59)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 43
Identifica-
tion Description Commands
.FIN Command status; 1 = Command
has ended at least once, 0,
invalid (variable not available) =
Command has never ended All except START
and END
.FP{x}.CNT Intensity for the fixed endpoint x
(1 - 9) in counts MEAS Opt
.FP{x}.DME Measured value differential for
the fixed endpoint x (1 - 9) MET
.FP{x}.DVT Drift for the fixed endpoint x (1 -
9) in µg/min KFC, BRC
.FP{x}.ERC ERC for the fixed endpoint x (1 -
9) DET
.FP{x}.MEA Measured value for the fixed end-
point x (1 - 9) in mV DET, MET, SET,
KFT, STAT
.FP{x}.MEA Measured value for the fixed end-
point x (1 - 9) in the unit of the
measured value KFC, MEAS (with-
out T/Flow,
Conc, Ref, Spec)
.FP{x}.QTY Measured value for the fixed end-
point x (1 - 9) in µg KFC, BRC
.FP{x}.TEM Temperature for the fixed end-
point x (1 - 9) in °C DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Conc, Ref, Spec)
.FP{x}.TIM Time in s until the fixed endpoint
x (1 - 9) is reached DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Conc, Ref, Spec)
.FP{x}.TRN Transmission for the fixed end-
point x (1 - 9) in % MEAS Opt
.FP{x}.VOL Volume for the fixed endpoint x
(1 - 9) in mL DET, MET, SET,
KFT, STAT
.GMA Maximum gas flow rate in
mL/min MEAS T/Flow
.GMI Minimum gas flow rate in mL/min MEAS T/Flow