Leica Geosystems Leica mojoXact Plus - Manual (Page 100)

100 Guidance, Leica mojoXact Plus
7.4.6 Exporting Waylines
General informa-
tion Waylines can be exported to a USB memory key. This is useful for copying the
waylines to other mojoXact Plus units and good practice for providing a backup of
waylines.

Refer to "Appendix B Formatting USB Memory Keys" for important informa-
tion about using USB memory keys with the mojoXact Plus product.

Do not turn off the mojoXact Plus, or remove the USB memory, while the
wayline export is in progress.
Exporting waylines,
step-by-step To export all waylines stored in the mojoXact Plus, carry out the following steps:
1. The USB interface is at the front of the
mojoXact Plus. Unscrew the door at the
front so it can open and lie flat, and
insert a compatible USB memory key
into the USB slot.
2. On the main navigation screen, select the Guidance button.
The Guidance menu appears.
3. Select the Wayline Management button.
The Manage Waylines screen appears.
4. Select the Export to USB button.
The Export Waylines screen appears giving the operator the option
to proceed with the export or to cancel it.
5. On the Export Waylines screen that appears:
• To export all waylines to the USB memory key, select .
• To cancel the export operation and return to the Manage Waylines screen,
select .

If there are already waylines with the same name on the USB memory key
a message appears to confirm overwriting the existing waylines.
6. On the screen that appears to confirm overwriting existing waylines that have the
same names:
• To overwrite the waylines on the USB memory key, select . You are
returned to the Manage Waylines screen.