Leica Geosystems Leica mojoXact Plus - Manual (Page 92)

92 Guidance, Leica mojoXact Plus
5. To save the wayline:
• select .
The Save Wayline screen appears. Enter a name of up to 17 characters
(including spaces) for the wayline, and select to return to the main navi-
gation screen. The wayline is now active and ready for use.
OR
• to use the wayline without first saving it and return to the main navigation
screen, select .
7.2 A+ Heading Guidance
General informa-
tion
Setting A+ heading
guidance, step-by-
step To set up A+ heading guidance, carry out the following steps:
When a wayline is set, the system allows the operator to save the wayline with
a recognisable name so that it can be retrieved and re-used. If the operator
chooses not to save the wayline now, it can be saved later using the save feature
of Wayline Management (refer to Section "7.4 Wayline Management").
In A+ heading guidance, working lines are parallel,
and are set by defining an initial waypoint and a
compass bearing.
When the vehicle reaches the end of each working
line, the operator must disengage the auto-steer
(usually by turning the steering wheel or using the
auto-steer button) and turn the vehicle around
before engaging on the next working line.
1. On the main navigation screen, select the Guidance button.
The Guidance menu appears.
2. Select the Set A+ Heading button.
The Set A+ Heading menu appears.