Leica Geosystems Leica mojoXact Plus User Manual
Page 93
Leica mojoXact Plus, Guidance
93
The heading (compass bearing) for the wayline can be set by entering a value in
the Heading field. The Heading field is the true compass bearing, that is, North
is 0.00
o
, East is 90.00
o
, South is 180.00
o
and West is 270.00
o
.
4. To set the heading (compass bearing) for the wayline select the Heading field at
the bottom of the screen and enter the heading (compass bearing) for the
wayline. Select
.
The Save Wayline dialog box appears.
When a wayline is set, the system allows the operator to save the wayline with
a recognisable name so that it can be retrieved and re-used. If the operator
chooses not to save the wayline now, it can be saved later using the save feature
of Wayline Management (refer to Section "7.4 Wayline Management").
5. To save the wayline:
• select .
3. Position your vehicle in the field at the point where you want to
start (waypoint A), and select the Set A button.
The main navigation area of the screen shows where the starting
waypoint is and the Heading field appears.