Leica Geosystems Leica mojoXact Plus - Manual (Page 25)

Leica mojoXact Plus, Running the mojoXact Plus for the First Time 25
terrain compensation, the position of the vehicle is the corrected position. The differ-
ence in these two positions is obvious, clearly demonstrating why the use of terrain
compensation is necessary for accurate positioning and guidance.
To setup terrain compensation, carry out the following steps:
1. Ensure that the New Compensation checkbox is checked, and select .
To return to the Vehicle Settings screen, select .
2. Follow the directions on the screen and drive to a flat area and bring the vehicle
to a full stop.
3. To proceed with the Terrain Compensation setup, select . The operator is
instructed not to move the vehicle as tuning of the sensors is in progress.
a) GPS antenna
b) Uncorrected position
c)
Roll angle
d) Corrected position
a
b
c
d