Leica Geosystems Leica mojoXact Plus - Manual (Page 85)

Leica mojoXact Plus, Correction Sources 85
6.4 External Radio
Overview The mojoXact Plus can utilise an external base station or a UHF or VHF radio for posi-
tion data. These are configured as an External Radio correction source.
Enabling External
Radio, step-by-
step To enable External Radio as the correction source, carry out the following steps:
1. At the main navigation screen, select the Settings button.
The Settings menu appears.
2. Select the Correction Settings button.
The Correction Settings menu appears.
3. Select the External Radio button.
The External Radio screen appears.
4. Select the Parity from the list. The parity must be the same as the parity that is
configured for the external radio.
5. Select the Reference Format from the list. The reference format must be the
same as the reference format that is configured for the external base station.
6. Select the Baud Rate from the list. The baud rate must be the same as the baud
rate that is configured for the external radio.
7. To accept the selected values, select to establish a connection with the
correction source and proceed to the Correction Source Status screen.
To return to the Correction Settings menu and cancel the parity, reference
format and baud rate settings, select .