Leica Geosystems Leica mojoXact Plus - Manual (Page 124)

124 Virtual Wrench Remote Service, Leica mojoXact Plus
10 Virtual Wrench Remote Service
Virtual Wrench™ is a remote system that the mojoXact Plus can connect to. Through
Virtual Wrench™ the operator can upgrade the mojoXact Plus software and unlock
features on the mojoXact Plus. Authorised Leica support staff can also use Virtual
Wrench to service your mojoXact Plus.
The instructions for connecting to, and disconnecting from Virtual Wrench™ for a
mojoXact Plus that is used with a third-party terminal, are provided in the sections
below. How to upgrade the mojoXact Plus’ software from Virtual Wrench™ is
discussed in Section "11.1 Upgrading Software from Virtual Wrench". For information
on connecting to Virtual Wrench™ and the features offered when the mojoXact Plus
in used with a Leica mojo3D, refer to the Leica mojo3D User Manual.
Limitations A connection to Virtual Wrench
TM
can only be established when the mojoXact Plus
has an internet connection. For an internet connection to be possible, the following
must have occurred:
• The cell modem’s SIM Card must be installed correctly and you must have a data
plan for the SIM Card. Refer to Section "2.4 SIM Card Installation".
• The cell modem must be set up with the information provided by the data plan
provider. Refer to Section "3.6.2 Cell Modem Settings".
To check that you have an internet connection:
• Check the Cell Modem icon that displays in the Information Area at the bottom
of the main navigation screen. indicates a successful connection with good
signal strength. indicates that the connection is successful but the signal
strength is poor and indicates that the connection was not successful.
• Check that the errors list does not contain the "No internet available" error. Refer
to Section "9.6 Error Notifications".
• Check that the cell modem (including its cable) is not damaged and is connected
to the mojoXact Plus.
Legal information This software may include product activation and other technology designed to
prevent unauthorised use and copying or to provide technical or support services
remotely to Leica Geosystems or its authorised reseller.
This technology may cause your computer or device to automatically connect to the
internet. Additionally, once connected, the software may transmit your serial
number/license number to Leica Geosystems and in doing so may prevent uses of the
software which are not permitted; also, the software may transmit other support-
related information, such as configurations, usage statistics, or allow or push down-
loads of updates to product software.