Leica Geosystems Leica mojoXact Plus - Manual (Page 140)

140 Safety Directions, Leica mojoXact Plus
ƽ
CAUTION Watch out for erroneous measurement results if the product has been dropped or
has been misused, modified, stored for long periods or transported.
Precautions:
Periodically carry out test measurements and perform the field adjustments indicated
in the user manual, particularly after the product has been subjected to abnormal use
and before and after important measurements.
ƽ
WARNING Inadequate securing of the working site can lead to dangerous situations, for
example in traffic, on building sites, and at industrial installations.
Precautions:
Always ensure that the working site is adequately secured. Adhere to the regulations
governing safety and accident prevention and road traffic.
ƽ
WARNING Only Leica Geosystems authorised service workshops are entitled to repair these
products.
ƽ
CAUTION If the accessories used with the product are not properly secured and the product is
subjected to mechanical shock, for example, by blows or falling objects, the product
may be damaged or people may sustain injury.
Precautions:
When setting-up the product, make sure that the accessories are correctly adapted,
fitted, secured, and locked in position.
Avoid subjecting the product to mechanical stress.
ƽ
CAUTION The product uses the GPS P-Code signal which by U.S. policy may be switched off
without notice.
ƽ
WARNING Incorrect fastening of the external antenna to vehicles poses the risk of the equip-
ment being broken by mechanical influence, vibration or airstream. This may result in
accident and injury.
Precautions:
Attach the external antenna professionally.
ƽ
CAUTION Installing near mechanically moving machine components may damage the product.
Precautions:
Deflect the mechanically moving machine components as far as possible and define
a safe installation zone.
ƽ
CAUTION Beware of inadequate steering if the vehicle is defective, for example, after a crash
or other damaging events, or alterations to the vehicle.
Precautions:
Periodically perform control measurements and field adjustments on the vehicle as
specified in the User Manual.