Leica Geosystems Leica mojoXact Plus - Manual (Page 103)

Leica mojoXact Plus, Guidance 103
7.5 Field Offset
Description The field offset is used to move the wayline by a specific distance. This is useful in
applications where a high accuracy GPS source is used and it is desirable to offset a
saved wayline by a known amount.
When a new wayline is created the field offset is zeroed. When a wayline is loaded,
the field offset that is stored with it is also loaded.
Setting a field
offset, step-by-
step To set a field offset, carry out the following steps:
1. On the main navigation screen, select the Guidance button.
The Guidance menu appears.
2. Select the Wayline Management button.
The Manage Waylines screen appears.
3. Select the wayline that the field offset is to be applied to from the
drop-down list.
4. Select the Field Offset button.
The Field Offset screen appears.
5. Enter the value for the field offset (in the units of the configured
region, and to three decimal places) in the Enter Field Offset
field.
6. To save the field offset with the selected wayline, and return to the main navi-
gation screen, select . The new field offset value is saved for the selected
wayline.
OR
To return to the Manage Waylines screen and not save the field offset, select
.