Leica Geosystems Leica mojoXact Plus - Manual (Page 120)

120 System Information and Errors, Leica mojoXact Plus
9.5 Cell Modem Status
Overview If an internal modem is configured for the mojoXact Plus, the Cell Modem screen
(shown below) provides the following data so the operator can check the current
status of the system’s cell modem. If an external modem or no modem is configured,
this screen just states these as the type.
Displaying cell
modem status,
step-by-step To view the status of the mojoXact Plus’ cell modem, carry out the following steps:
Type - The type of the cell modem.
Signal Strength - The cell modem’s signal strength (RSSI). If the signal strength
is less than -90, consider changing the cell modem’s network
mode.
Network Mode - The network mode. Possible values are GSM, AUTO and HSPA.
Network - The network in use.
Serial Number - The cell modem’s serial number.
SIM Pin Status - The SIM PIN’s status.
SIM Card Status - The SIM card’s status.
1. On the main navigation screen, select the Service button.
The Service menu appears.
2. Select the Cell Modem Information button.
The Cell Modem screen appears.
3. To return to the main navigation screen, select .
To return to the Service menu, select .