Leica Geosystems Leica mojoXact Plus - Manual (Page 82)

82 Correction Sources, Leica mojoXact Plus
6.3 Internal Radio (RTK Base Station)
Overview A mojoXact Plus can utilise a local base station for position data and this is referred
to as using an Internal Radio or RTK Base Station.

This functionality is not available in Russia.
Enabling Internal
Radio, step-by-
step To enable Internal Radio (RTK Base Station) as the correction source, carry out the
following steps:
1. At the main navigation screen, select the Settings button.
The Settings menu appears.
2. Select the Correction Settings button.
The Correction Settings menu appears.
3. Select the Internal Radio button.
The Internal Radio screen appears.
4. Select the channel from the list. The channel must be the same as the channel
that is configured for the base station.
5. Select the Reference Format from the list. The reference format must be the
same as the reference format that is configured for the base station.
6. To accept the selected values, select to establish a connection with the
correction source and proceed to the Correction Source Status screen.
To return to the Correction Settings menu and cancel the channel and reference
format selections, select .