Leica Geosystems Leica mojoXact Plus - Manual (Page 9)

Leica mojoXact Plus, System Overview 9
Accessories
required For a connection to a Leica mojo3D, the following accessories are required:
•
Leica mojo3D port expansion cable

The GPS antenna supplied with the Leica mojo3D is not required when
operating with a Leica mojoXact Plus.
For a connection to a third party terminal that is ISOBUS Universal Terminal
compliant, the following accessories are required:
•
ISO UT cable (compatible with the third party terminal)
1.3 Features
1.3.1 mojoXact Plus Hardware
mojoXact Plus
hardware features
• Simple installation and color-coded quick-install antennas.
• Integrated L1/L2 GPS receiver.
• Integrated HSPA cell modem.
• 12 volt operation.
• Internal storage for waylines and settings.
1.3.2 mojoXact Plus Software
mojoXact Plus
software features • Intuitive software that allows for easy setup and use.
• On screen field guidance.
• Auto-steer compatible.
• Upgrade, backup, and rollback of software through the USB interface.
• Virtual Wrench™, which provides remote support and over-the-air software
upgrades.
1.3.3 mojoXact Plus Positioning
mojoXact Plus
positioning
features • GPS algorithms are tuned for the agricultural environment.
• Optional NMEA (NMEA 0183, NMEA 2000) output for auxiliary devices that
require GPS data.
• Optional Radar-out signal for auxiliary devices that require a radar speed signal.
• Advanced 3-axis terrain compensation.
• Compatible with the following correction sources: base station RTK, Network
RTK, external radio and Dual Frequency GL1DE
TM
.
a) Green LED - lights when a display is
connected.
b) Orange LED - lights when an error is
active.
c) Red LED - lights when the
mojoXact Plus has power.
d) USB/SIM port - data transfer and
cell modem SIM port.
a
b
c
d