4 disengage auto-steer, 2 steer kit selection and setup, On "5.2 steer kit selection and – Leica Geosystems Leica mojoXact Plus User Manual
Page 50: Setup"), Disengage auto-steer, Steer kit selection and setup
50
Auto-Steer, Leica mojoXact Plus
5.1.4
Disengage Auto-steer
To disengage auto-steer, carry out the steps of one of the following methods:
OR
Other methods to disengage the steering will be available and these
methods will depend on the steer kit used.
5.2
Steer Kit Selection and Setup
General Introduc-
tion
This section describes how to select and setup a steer kit, and troubleshoot prob-
lems, should they occur.
Selecting and
setting up a steer
kit, step-by-step
To select a Steer Kit and set it up, carry out the following steps:
1. On the main navigation screen, select the auto-steer button when
it is green.
The auto-steer button turns yellow or orange to indicate auto-steer
is disengaged and the vehicle is no longer being automatically
steered.
1. On the main navigation screen, select the roading button.
The auto-steer button turns red indicating that roading is turned
on, the roading button changes to have a locked padlock
, and
auto-steer is disengaged.
1. On the main navigation screen, select the Settings button.
The Settings menu appears.
2. Select the Steering Settings button.
The Steering Settings menu appears.