Leica Geosystems Leica mojoXact Plus - Manual (Page 22)

22 Running the mojoXact Plus for the First Time, Leica mojoXact Plus
3.3 Initial Setup Wizard
Overview The initial setup wizard executes once the universal terminal features of the
mojoXact Plus system have been unlocked and its initial screen appears.
The setup wizard steps the operator through the initial setup process allowing the
operator to setup:
• Region settings such as the region (or country), and units to use for length,
speed and area.
• Vehicle type and setup.
• Terrain compensation.
• The physical orientation of the mojoXact Plus.
The setup wizard can be executed at any time should there be the need to change
the initial settings. Section "3.5 Running the Setup Wizard at any Time" provides
instructions on how to access the setup wizard at any time.
1. To proceed to the first configuration screen of the Initial Setup Wizard, the
Region Settings, select .
Region settings,
step-by-step The Region Settings screen is the first configuration screen of the setup wizard. It
allows the operator to set the region (or country), and units to use for length, speed
and area.