7 importing waylines, Importing waylines – Leica Geosystems Leica mojoXact Plus User Manual
Page 101
Leica mojoXact Plus, Guidance
101
7.4.7
Importing Waylines
General informa-
tion
Waylines that have been exported to a USB memory key from the same mojoXact Plus
or a different mojoXact Plus can be imported from the USB memory key. The operator
can choose to import all waylines stored on the USB memory key, or just selected
waylines.
Refer to "Appendix B Formatting USB Memory Keys" for important informa-
tion about using USB memory keys with the mojoXact Plus.
Do not turn the mojoXact Plus off, or remove the USB memory key, while
the wayline import is in progress.
Importing
waylines, step-by-
step
To import waylines from a USB memory key, carry out the following steps:
OR
• To cancel the overwrite operation, select
. You are returned to the Manage
Waylines screen.
Do not remove the USB memory key from the mojoXact Plus until it has
been powered down.
7. To return to the Guidance menu, select
.
8. To return to the main navigation screen, select
.
1. The USB interface is at the front of the
mojoXact Plus. Unscrew the door at the
front so it can open and lie flat, and
insert a compatible USB memory key
into the USB slot.
2. On the main navigation screen, tap the Guidance button.
The Guidance menu appears.
3. Select the Wayline Management button.
The Manage Waylines screen appears.
If there are no waylines stored on the USB memory key, the
Import from USB button is disabled (greyed out).