Leica Geosystems Leica mojoXact Plus - Manual (Page 71)

Leica mojoXact Plus, Auto-Steer 71
The screen shown below appears.
8. To engage the steering, select the Auto-steer Engage button.

Auto-steer can be turned off at any time, by selecting the on-
screen engage button or by manually moving the steering
wheel.
9. Select the turn left button, and check that the steering wheel turns
to the left.
If the steering wheel does not turn to the left, the problem needs
to be corrected. Refer to Section "5.6.1 Troubleshooting Steering
Test Issues".
10. Select the center button, and check that the steering wheel turns
to the center position.
If the steering wheel does not turn to the centered position, the
problem needs to be corrected. Refer to Section "5.6.1 Trouble-
shooting Steering Test Issues".
11. Select the turn right button, and check that the steering wheel
turns to the right.
If the steering wheel does not turn to the right, the problem needs
to be corrected. Refer to Section "5.6.1 Troubleshooting Steering
Test Issues".
12. After completing the steering tests, select the button to return to the Steering
Settings menu.
If the tests are completed successfully then the auto-steer function is ready for
use. If any of the tests failed, then the faults need to be diagnosed and corrected,
and the auto-steer test repeated before auto-steer is used.