Appendix a redeeming a system option voucher, Appendix a, Redeeming a system option voucher – Leica Geosystems Leica mojoXact Plus User Manual
Page 154
154
Redeeming a System Option Voucher, Leica mojoXact Plus
Appendix A
Redeeming a System Option Voucher
General informa-
tion
Some features are not enabled on the mojoXact Plus, and these include:
• John Deere R Series
• Network Upgrade
• Network Data Plan
• Virtual Vista
• Universal Terminal
To access these features it is necessary to purchase a voucher from your dealer
which will give you a code that is used to unlock the feature. The steps below explain
how to redeem a voucher.
Redeem voucher
To redeem a system option voucher, carry out the following steps:
1. You will need the serial number of the mojoXact Plus. Follow the instructions in
Section "9.4 Device Information" to retrieve the serial number. The serial number
is the six digit article number with a dot followed by the serial; for example,
804798.000001.
2. Visit http://www.virtualwrench.com/redeem and follow the instructions on
screen.
3. Upon successful completion a feature unlock code will be provided. This unlock
code is unique to the device with the serial number entered.
Connect the mojoXact Plus to Virtual Wrench™ to automatically download
the unlock code and enable the feature (refer to "10 Virtual Wrench
Remote Service").
OR
Enter the unlock code directly onto the mojoXact Plus to manually enable
the feature (refer to "3.7 Feature Unlock").