Leica Geosystems Leica mojoXact Plus User Manual
Page 30
30
Running the mojoXact Plus for the First Time, Leica mojoXact Plus
Auto-Steer
Engage
•
Auto-Steer engage and disengage.
Refer to Chapter "5 Auto-Steer" for details on the
auto-steer feature and how to use it.
Guidance
•
Setting AB, A+ Heading and Pivot waylines.
•
Wayline management.
Refer to Chapter "7 Guidance" for details on
setting up waylines and wayline management.
Nudge
•
Nudge options to correct GPS drift.
Refer to Section "7.6 Nudge" for details on using
the nudge feature.
Service &
Information
•
System Status Information - refer to Section "9.1
Status Information" for details.
•
Errors - refer to Section "9.6 Error Notifications"
for details.
•
Position Information - refer to Section "9.2 Posi-
tion Information" for details.
•
Correction Source Information - refer to Section
"6.5 Correction Source Status" for details
•
Device Information - refer to Section "9.4 Device
Information" for details.
•
Cell Modem Information - refer to Section "9.5 Cell
Modem Status" for details.
•
Connection to Virtual Wrench - refer to Chapter
"10 Virtual Wrench Remote Service" for details.
Settings
•
System Settings - refer to Sections "3.6 Changing
System Settings", "3.5 Running the Setup Wizard
at any Time" and "3.7 Feature Unlock" for details.
•
Vehicle Settings - refer to Chapter "4 Vehicles and
Implements" for details.
•
Steering Settings - refer to Chapter "5 Auto-Steer"
for details.
•
Correction Settings - refer to Chapter "6 Correction
Sources" for details.
•
Software Settings - refer to Chapter "11 Software
Maintenance" for details.
Roading
Lock/Unlock
•
Roading engage and disengage.
Refer to Section "5.1 Engage Auto-Steer" for
details on how to turn the roading safety feature
on and off.