Leica Geosystems Leica mojoXact Plus User Manual
Page 3
Leica mojoXact Plus, Introduction
3
Available
documentation
The images in this manual are for reference purposes only. Individual screens and
icons may differ from the actual items.
Process for setting
up the
mojoXact Plus to
auto-steer
From when the customer receives their mojoXact Plus to having it auto-steer the
vehicle, the following steps need to occur:
1. Unpack your mojoXact Plus and ensure that all components are included (refer
to Section "1.2 Components of the mojoXact Plus System"), and that any other
components required, such as an ISO UT cable and external CDMA modem are
also present.
2. Read this manual, the Leica mojoXact Plus User Manual.
3. Install the mojoXact Plus system following the instructions in Chapter "2 System
4. Power up the mojoXact Plus (refer to Section "3.1 Starting Up").
If the mojoXact Plus is connected to a third-party terminal, complete the following
steps:
1. Unlock the universal terminal features of the mojoXact Plus (refer to Section "3.2
Universal Terminal Unlock Code").
2. Step through the initial setup wizard supplying the information that is asked for
(refer to Section "3.3 Initial Setup Wizard").
3. Select and configure the steer kit (refer to Section "5.2 Steer Kit Selection and
4. Test the auto-steer settings (refer to Section "5.6 Testing Auto-Steer").
5. If the vehicle has an implement attached to it, configure the implement settings
(refer to Section "4.3 Implement Setup").
6. Configure the correction source (refer to Chapter "6 Correction Sources").
7. Set a wayline (refer to Chapter "7 Guidance").
8. Ensure all auto-steer engage criteria are met (refer to Section "5.1 Engage Auto-
9. Engage auto-steer (refer to Section "5.1 Engage Auto-Steer").
If the mojoXact Plus is connected to a Leica mojo3D, refer to the Leica mojo3D User
Manual for instructions on setting up your system to auto-steer.
Document Name
Description
Leica mojoXact Plus
User Manual
This manual. All instructions required in order to operate
the mojoXact Plus product when it is connected to a Leica
mojo3D or a third party terminal that is ISOBUS Universal
Terminal compliant, to a basic level are contained in this
User Manual. It provides an overview of the system
together with technical data and safety directions.
Leica mojo3D
User Manual
All instructions required in order to operate the mojo3D
product to a basic level are contained in its User Manual. It
provides an overview of the system together with technical
data and safety directions.