7 feature unlock, Feature unlock, D "3.7 feature unlock" for deta – Leica Geosystems Leica mojoXact Plus User Manual
Page 35
![background image](/manuals/651872/35/background.png)
Leica mojoXact Plus, Running the mojoXact Plus for the First Time
35
Troubleshooting
connection prob-
lems
If the signal strength is poor, but you have a good signal on your mobile phone,
check:
•
that the cell antenna is not obstructed or damaged, and that its cable is not
damaged.
•
that the Cell Network Mode field at the third Modem Settings screen is appropri-
ately set for your region.
If the cell modem connection was not successful, check:
•
that the values entered in the APN, Username and Password fields are correct.
•
that you have an active data plan for the SIM Card.
•
that the cell antenna and its cable are not damaged.
•
that the Cell Network Mode field at the third Modem Settings screen, is appro-
priately set for your region.
3.7
Feature Unlock
Some features are not enabled by default on the mojoXact Plus, and these include:
•
John Deere R Series
•
Network Upgrade
•
Network Data Plan
•
Virtual Vista
•
Universal Terminal
To access these features it is necessary to purchase a voucher from your dealer
which will give you a code that is used to unlock the feature. Features can be
unlocked using the steps below or Virtual Wrench
TM
as explained in Chapter "10
Virtual Wrench Remote Service".
Unlocking a
feature, step-by-
step
To unlock a feature, carry out the following steps:
1. On the main navigation screen, select the Settings button.
The Settings menu appears.
2. On the Settings menu, select the System Settings button.
The System Settings menu appears.
3. On the System Settings menu, select the Feature Settings
button.
The Features screen (shown below) appears, with a list of features
and their availability, that is, whether they are locked or unlocked.