Leica Geosystems Leica mojoXact Plus - Manual (Page 95)

Leica mojoXact Plus, Guidance 95
When a wayline is set, the system allows the operator to save the wayline with
a recognisable name so that it can be retrieved and re-used. If the operator
chooses not to save the wayline now, it can be saved later using the save feature
of Wayline Management (refer to Section "7.4 Wayline Management").
6. To save the wayline:
• select .
4. Drive to waypoint B, and select the Set B button.

The Set B button remains greyed out until the minimum
distance between waypoints A and B is travelled. The
minimum distance between waypoints A and B is 30 meters
(100 feet). The greater the distance between the waypoints,
the better the accuracy of the working line.
5. Drive to waypoint C, and tap the Set C button.

The Set C button remains greyed out until the minimum
distance between waypoints B and C and waypoints A and C
is travelled. Waypoint C must be at least 30 meters from
waypoint A and at least 30 meters from waypoint B.
The Save Wayline dialog box appears.