Leica Geosystems Leica mojoXact Plus - Manual (Page 51)

Leica mojoXact Plus, Auto-Steer 51
3. Select the Steer Kit Setup button.
The Setup Steer Kit screen appears.
4. Select the appropriate steer kit from the list.
5. To accept the selection and continue with the setup process, select the
button. What screen appears next is dependent on the steer kit that is selected.
To cancel the selection and go back to the Steering Settings menu, select the
button.
6. If the Manufacturer screen appears (followed by the Model screen), make the
appropriate selection from the Manufacturer list and then from the Model list.
7. To accept the selections and continue with the setup process, select the
button. The Steering Kit Status screen appears.
To go back to the Steering Settings menu, select the button.
8. Both of the CAN Bus Connected and Steering Kit Active indicators on the Steering
Kit Status screen should have a icon to their left. If they do not it is neces-
sary to diagnose and correct the problems, otherwise it will not be possible to
engage auto-steer. Refer to Section "5.2.1 Troubleshooting Steer Kit and CAN
Bus Problems" for suggestions.