Leica Geosystems Leica mojoXact Plus - Manual (Page 80)

80 Correction Sources, Leica mojoXact Plus
7. Once a stream is selected, select to establish a connection with the correc-
tion source and proceed to the Correction Source Status screen.
To return to the initial Network RTK screen and cancel the stream selection,
select .
8. If all details are entered correctly, the system attempts to connect to the correc-
tion source. This may take some time and if successful the Correction Source
Status screen appears with a in front of Receiving Correction Data.
9. If the connection is successful, tap to proceed to the GL1DE
TM
Fallback
screen.
If the connection was not successful (indicated by a in front of Receiving
Correction Data), select the button to go back to the Correction Settings
menu. If the connection fails, you can proceed to the GL1DE
TM
Fallback screen;
that is, you are not forced to fix the connection problem, although it is recom-
mended that you do.
If the connection is not successful:
• Check that the Network RTK settings are correct (Host, Port, Username, Pass-
word and Stream).
• Check that the cell modem connection is established.
• Check that you have an internet connection, as explained in the Limitations
section previously.
• Check that you have a GPS connection, as explained in Section "6.1 GL1DE".