2 disconnecting from virtual wrench – Leica Geosystems Leica mojoXact Plus User Manual
Page 126
126
Virtual Wrench Remote Service, Leica mojoXact Plus
10.2
Disconnecting from Virtual Wrench
Disconnecting
from Virtual
Wrench
TM
, step-
by-step
To disconnect the mojoXact Plus from Virtual Wrench
TM
, carry out the following
steps:
3. To proceed with the connection to Virtual Wrench
TM
, select
.
When you return to the main navigation screen, the
icon appears at the
bottom of the screen on the right, indicating that you are connected to Virtual
Wrench
TM
. When your mojoXact Plus is being serviced by an authorised Leica
support person, the
icon appears at the bottom of the screen on the right.
OR
To abandon the connection request and return to the Service menu, select
.
1. On the main navigation screen, select the Service button.
The Service menu appears.
2. Select the Virtual Wrench button.
The Virtual Wrench screen appears.
3. To disconnect from Virtual Wrench
TM
and return to the main navigation screen,
select
. The
icon is no longer displayed at the bottom of the main navi-
gation screen, indicating that you are no longer connected to Virtual Wrench
TM
.
To abandon the disconnection request (and remain connected to Virtual
Wrench
TM
) and return to the Service menu, select
.