Leica Geosystems Leica mojoXact Plus - Manual (Page 57)

Leica mojoXact Plus, Auto-Steer 57
5.2.1 Troubleshooting Steer Kit and CAN Bus Problems
If the Steering Kit Status screen indicates that there is a problem with either the CAN
Bus connection or the Steering Kit, or both, check that:
• the steer kit selected in the configuration matches the steer kit physically installed
in the vehicle.
• the steer kit’s cable is correctly connected to the mojoXact port expansion cable.
• the steer kit has power and is turned on.
5.3 Steer Kit Status
Information is not available for all steer kits and for those that it is available for, what
is displayed is dependent on the configured steer kit. The Steer Kit Information
button in the Steering Settings menu is only selectable if the configured steer kit has
information available.
Steer kit informa-
tion, step-by-step To find out about the steer kit that is currently configured, carry out the following
steps:
1. On the main navigation screen, select the Settings button.
The Settings menu appears.
2. Select the Steering Settings button.
The Steering Settings menu appears.
3. Select the Steer Kit Information button.
The Steer Kit Information screen appears. The information
displayed is dependent on the steer kit that is currently configured.
4. To proceed to the main navigation screen, select the button.
To go back to the Steering Settings menu, select the button.