Leica Geosystems Leica mojoXact Plus - Manual (Page 110)

110 NMEA Output, Leica mojoXact Plus
8.1.2 Logging NMEA 0183 Data to USB
The NMEA 0183 output can be logged to a USB memory key for post-processing of
the data. Refer to "Appendix B Formatting USB Memory Keys" for important informa-
tion about using USB memory keys with the mojoXact Plus.
To enable logging of NMEA 0183 data to USB, carry out the following steps:
The Output NMEA 0183 checkbox must be selected for the Log NMEA to USB
checkbox to be visible.
5. On the NMEA Settings screen, ensure that the Output NMEA 0183 checkbox is
selected and select the Log NMEA to USB checkbox.
6. To proceed to the NMEA 0183 Settings screen select .
The NMEA 0183 Settings screen appears.
To cancel any changes to the checkboxes and return to the System Settings
menu, select .
1. The USB interface is at the front of
the mojoXact Plus. Unscrew the
door at the front so it can open and
lie flat, and insert a compatible USB
memory key into the USB slot.
2. At the main navigation screen, select the Settings button.
The Settings menu appears.
3. On the Settings menu, select the System Settings button.
The System Settings menu appears.
4. On the System Settings menu, select the NMEA Settings button.
The NMEA Settings screen appears.