Leica Geosystems Leica mojoXact Plus - Manual (Page 32)

32 Running the mojoXact Plus for the First Time, Leica mojoXact Plus
3.6.1 Changing Region Settings
Region settings include the Country settings, and the units of measure to use for
length, speed and area. To change the region settings carry out the following steps:
2. To change the region or country, select the new one from the Region list.
3. To change the units to use for length, select the new one from the Length list.
Lengths may be measured in Metric, Imperial, or US Standard units.
4. To change the units to use for speed, select the new one from the Speed list.
Speeds may be measured in Metric, Imperial, or US Standard units.
5. To change the units to use for area, select the new one from the Area list. Areas
may be measured in Metric, Imperial, or US Standard units. The Imperial acre is
the defined international acre, and the US acre is the slightly smaller US Survey
acre.
6. To accept the Region settings and return to the main navigation screen, select
.
To cancel any changes to the values and return to the System Settings menu,
select .
3.6.2 Cell Modem Settings
The mojoXact Plus allows the operator to choose an internal modem, external
ethernet modem or no modem. To setup the cell modem carry out the following
steps:
1. On the System Settings menu, select the Region Settings button.
The Region Settings screen appears.
1. On the System Settings menu, select the Cell Modem Settings
button.
The Modem Settings screen appears.