Leica Geosystems Leica mojoXact Plus User Manual
Page 53
Leica mojoXact Plus, Auto-Steer
53
15. For some steer kits setup is now complete, and you are returned to the main
navigation screen when the
button is selected. For other steer kits, the
Steering Calibration screen appears.
To cancel any settings and go back to the previous screen, select the
button.
16. If the Steering Calibration screen appears, locate the vehicle in a place where it
is safe to perform full lock turns, that is, an area free of obstacles. A series of
dialogue screens is going to appear to guide you through the steering calibration
process. The screens that appear are dependent on the steering kit that is
selected and configured. Below is an example steer kit calibration process.
17. Follow the directions on the screen and drive at 4 km/h to perform the steering
calibration.
When you are driving at 4 km/h and are ready to proceed with the steer kit cali-
bration, select the
button. The next steering calibration screen appears.
To return to the Steering Settings menu and not complete the steer kit calibration,
select the
button.