13 safety directions, 1 general introduction, 2 intended use – Leica Geosystems Leica mojoXact Plus User Manual
Page 138
138
Safety Directions, Leica mojoXact Plus
13
Safety Directions
13.1
General Introduction
Introduction
The following directions should enable the person responsible for the product, and
the person who actually uses the equipment, to anticipate and avoid operational
hazards.
The person responsible for the product must ensure that all users understand these
directions and adhere to them.
13.2
Intended Use
Permitted uses
The mojoXact Plus is intended:
•
for agricultural and forestry use only.
•
to be fitted to agricultural vehicles only. It is not permitted to install this product
in any other vehicles.
•
for data communication with external appliances.
•
for guidance of approved agricultural equipment.
•
for carrying out measurement tasks using various GNSS measuring techniques.
•
for recording GNSS and point related data.
•
for measuring raw data and computing coordinates using carrier phase and code
signal from GNSS satellites. (GNSS Systems)
Adverse use
The following are considered adverse uses of the mojoXact Plus:
•
Use of the product without instruction.
•
Use outside of the intended limits.
•
Disabling safety systems.
•
Removal of hazard notices.
•
Opening the product using tools, for example a screwdriver, unless this is specif-
ically permitted for certain functions.
•
Modification or conversion of the product.
•
Use after misappropriation.
•
Use of a product with obviously recognizable damages or defects.
•
Use with accessories from other manufacturers without the prior explicit
approval of Leica Geosystems.
•
Inadequate safeguards at the working site.
ƽ
WARNING
Adverse use can lead to injury, malfunction and damage.
It is the task of the person responsible for the equipment to inform the user about
hazards and how to counteract them. The product is not to be operated until the user
has been trained in its use.