Leica Geosystems Leica mojoXact Plus - Manual (Page 58)

58 Auto-Steer, Leica mojoXact Plus
5.4 Steer Kit Calibration

Calibrating the steer kit involves driving the vehicle at 4 km/h and being able
to turn the vehicle on full lock to the left and right. Ensure the vehicle is situ-
ated where this is possible and there are no obstacles.
Steer kit calibra-
tion, step-by-step To calibrate the steer kit, carry out the following steps:
1. On the main navigation screen, select the Settings button.
The Settings menu appears.
2. Select the Steering Settings button.
The Steering Settings menu appears.
3. Select the Steer Kit Calibration button.
The Steering Calibration screen appears.
4. Locate the vehicle in a place where it is safe to perform full lock turns, that is, an
area free of obstacles. A series of dialogue screens is going to appear to guide
you through the steering calibration process. The screens that appear are
dependent on the steering kit that is selected and configured. Below is an
example steer kit calibration process.
5. Follow the directions on the screen and drive at 4 km/h to perform the steering
calibration.
When you are driving at 4 km/h and are ready to proceed with the steer kit cali-
bration, select the button. The next steering calibration screen appears.
To return to the Steering Settings menu and not complete the steer kit calibration,
select the button.