Leica Geosystems Leica mojoXact Plus - Manual (Page 39)

Leica mojoXact Plus, Vehicles and Implements 39
3. On the Vehicle Settings menu, select the Vehicle Measurements
button.
The Vehicle Type screen, shown below, appears.
4. On the Vehicle Type screen, select your vehicle type from the list.
5. In the Antenna Offset field, enter the value in the units appropriate for the
configured region, for how far the antenna is mounted from the center of the
wheel tracks, or vehicle’s cab (providing the cab is centered over the wheel
tracks), as indicated by the graphic. Ideally this value should be zero as the
antenna should be mounted in the center of the vehicle’s cab towards the front.
If the antenna is mounted to the right of the center of the vehicle (when facing
the forward direction of travel), enter the Antenna Offset as a positive value. If
the antenna is mounted to the left of the center of the vehicle, enter the
Antenna Offset as a negative value.
6. To accept the values and proceed to the Vehicle Settings screen, select .
To cancel any changes to the values and return to the Vehicle Settings menu,
select .
7. At the Vehicle Settings screen, an example of which is shown below, enter the
measurements required for the vehicle type that you have selected.