Leica Geosystems Leica mojoXact Plus - Manual (Page 97)

Leica mojoXact Plus, Guidance 97
Saving a wayline,
step-by-step If the active wayline has not been saved with a name, it can be saved at anytime by
carrying out the following steps:
7.4.2 Loading a Saved Wayline
General Informa-
tion Once a wayline has been saved, it is available to be loaded to become the active
wayline for use.
Loading a wayline,
step-by-step To load a wayline that has previously been saved on the mojoXact Plus, carry out the
following steps:
1. On the main navigation screen, select the Guidance button.
The Guidance menu appears.
2. Select the Wayline Management button.
The Manage Waylines screen appears.
3. Select the Save Wayline button. If this button is greyed out, then
the active wayline has previously been saved.
The Save Wayline screen appears.
4. In the Edit Wayline Name field, enter a name of up to 17 characters (including
spaces) for the wayline, and select to return to the Manage Waylines screen.
To return to the Manage Waylines screen without saving the active wayline,
select .
5. To return to the Guidance menu, select .
6. To return to the main navigation screen, select .
1. On the main navigation screen, select the Guidance button.
The Guidance menu appears.
2. Select the Wayline Management button.
The Manage Waylines screen appears.
3. Select the wayline to be loaded from the list.
4. Select the Load Wayline button.
The selected wayline is loaded and displayed on the main naviga-
tion screen (which the operator has been returned to). This is now
the active wayline that auto-steer can engage on.