Leica Geosystems Leica mojoXact Plus - Manual (Page 31)

Leica mojoXact Plus, Running the mojoXact Plus for the First Time 31
3.5 Running the Setup Wizard at any Time
General informa-
tion The Setup Wizard can be run at any time after the initial setup of the mojoXact Plus.
The wizard guides the operator through the majority of the system setup, that is:
Region Setup, Vehicle Setup, Terrain Compensation and mojoXact Plus Orientation.
Alternatively the operator is able to setup specific features through the Settings
menu and System Settings menu. These features include:
• Vehicle Settings (refer to Chapter "4 Vehicles and Implements")
• Steering Settings (refer to Chapter "5 Auto-Steer")
• Correction Source Settings (refer to Chapter "6 Correction Sources")
• Software Settings (refer to Chapter "11 Software Maintenance")
• Region Settings (refer to Section "3.6.1 Changing Region Settings")
• Cell Modem Settings (refer to Section "3.6.2 Cell Modem Settings")
• NMEA Settings (refer to Chapter "8 NMEA Output")
Running the setup
wizard, step-by-
step To run the Setup Wizard, carry out the following steps:
3.6 Changing System Settings
General informa-
tion The system settings include:
• Country settings
• Measurement units (length, speed and area)
• Cell modem settings
Changing settings,
step-by-step To select and change one of these settings, carry out the following steps:
1. On the main navigation screen, select the Settings button.
The Settings menu appears.
2. On the Settings menu, select the System Settings button.
The System Settings menu appears.
3. On the System Settings menu, select the Setup Wizard button.
The Setup Wizard runs and the Region Settings screen appears.
4. Proceed through the Setup Wizard - refer to Section "3.3 Initial
Setup Wizard" for details, making any changes that are required.
You are returned to the main navigation screen at the completion
of the setup wizard.
1. On the main navigation screen, select the Settings button.
The Settings menu appears.
2. On the Settings menu, select the System Settings button.
The System Settings menu appears, providing access to the
system settings, some of which are detailed below.