Leica Geosystems Leica mojoXact Plus User Manual
Page 27
Leica mojoXact Plus, Running the mojoXact Plus for the First Time
27
6. When tuning is complete, select
to proceed to the mojoXact Plus Orientation
screen.
To return to the initial Terrain Compensation screen, select
.
mojoXact Plus
orientation, over-
view
When the mojoXact Plus Orientation screen appears, the image shows how the
mojoXact Plus is mounted in the vehicle, as far as it being mounted flat or on one of
its sides. This is determined during the Terrain Compensation process.
If the Terrain Compensation process during the Initial Setup Wizard is skipped, the
mounting of the mojoXact Plus will not be correctly determined, and it will be neces-
sary to return to the mojoXact Plus Orientation once the Terrain Compensation has
been performed. To setup the mojoXact Plus Orientation at a later time, refer to
Section "4.2 Terrain Compensation".
The orientation value is the degrees that the front of the mojoXact Plus is mounted
to the front of the vehicle. The front of the mojoXact Plus is where the USB port and
SIM card slot are accessed (and therefore the back is where all of the cables are
attached). For example, a mojoXact Plus mounted flat at 0 degrees to the front of
the vehicle, looks like this:
A mojoXact Plus mounted flat at 90 degrees to the front of the vehicle, looks like this: