Leica Geosystems Leica mojoXact Plus User Manual
Page 86
86
Correction Sources, Leica mojoXact Plus
8. If all details are entered correctly, the system attempts to connect to the correc-
tion source. This may take some time and if successful the Correction Source
Status screen appears with a
in front of Receiving Correction Data.
9. If the connection is successful, select
to proceed to the GL1DE
TM
Fallback
screen.
If the connection is not successful (indicated by a
in front of Receiving
Correction Data), you can select the
button to go back and make the neces-
sary changes. You can proceed to the GL1DE
TM
Fallback screen; that is, you are
not forced to fix the connection problem, although it is recommended that you
do so.
If the connection is not successful:
• Check that the External Radio settings (Parity, Reference Format and Baud
Rate) match these same settings on the external radio and base station.
• Check that the radio (whip) antenna mounted on the GPS antenna on the
vehicle’s cab, has line of sight with the radio and this is not obstructed by
buildings, trees, etc.
• Check the radio (whip) antenna for damage.
• Check that the external radio is turned on, receiving GPS data and has a posi-
tion fix.