Leica Geosystems Leica mojoXact Plus - Manual (Page 117)

Leica mojoXact Plus, System Information and Errors 117
Displaying posi-
tion information,
step-by-step To view the position information of the mojoXact Plus, carry out the following steps:
9.3 Correction Source Status
Overview The Correction Source Status screen, shown below, provides information on the
status of the network or base station that is providing the correction data.
The following data is displayed for the Internal Radio correction source. For the
Network RTK and External Radio correction sources, just the first six (6) items are
displayed.
Heading - The true compass bearing of the vehicle in degrees, where,
North is 0.00
o
, East is 90.00
o
, South is 180.00
o
and West is
270.00
o
.
Roll - The current calculated roll of the vehicle. If this value is greater
than 20 degrees, the auto-steer is disengaged.
Pitch - The current calculated pitch of the vehicle. If this value is
greater than 30 degrees, the auto-steer is disengaged.
1. On the main navigation screen, select the Service button.
The Service menu appears.
2. Select the Position Information button.
The Position Status screen appears.
3. To return to the main navigation screen, select .
To return to the Service menu, select .
Base Position - The latitude and longitude (in decimal degrees) of the base
station, and its altitude (in the length units configured for the
region).
Sats Tracked - The number of satellites being tracked by the base station.