Leica Geosystems Leica mojoXact Plus - Manual (Page 133)

Leica mojoXact Plus, Software Maintenance 133
The status screen appears with two progress bars (Current Stage and Overall
Progress) showing the current status of the software backup.
When the software backup is complete, select to return to the main naviga-
tion screen or select to return to the Software Settings menu.

Remove the USB memory key only when the mojoXact Plus is powered down.
11.4 Restoring the Previous Software Version
General informa-
tion If you perform a software upgrade and there is an unforeseen problem that requires
you to re-install a previous version of the software, you can restore the version of
the software that was in use before the last upgrade.
ƽ
CAUTION Do not turn the mojoXact Plus off while the software restore is in progress.
Restoring the
previous software
version, step-by-
step To restore a previous software version, carry out the following steps:
OR
To abandon the request and return to the Software Settings menu, select .
1. On the main navigation screen, select the Settings button.
The Settings menu appears.
2. Select the Software Settings button.
The Software Settings menu appears.
3. Select the Rollback Software button.
The Rollback Software screen appears.
The Rollback Software screen tells you the version of software that
is currently installed on your mojoXact Plus, and the version of the
software that will be restored.