11 software maintenance, 1 upgrading software from virtual wrench, 11 software maintenance" for detai – Leica Geosystems Leica mojoXact Plus User Manual
Page 128: Hapter "11 software maintenance")
![background image](/manuals/651872/128/background.png)
128
Software Maintenance, Leica mojoXact Plus
11
Software Maintenance
Overview
The mojoXact Plus provides features for maintaining its software, which include:
•
Upgrading the software through Virtual Wrench™ or from a USB memory key.
•
Backing up the software installed on the mojoXact Plus to a USB memory key.
•
Restoring the previous version of the software. This is a helpful feature should
an upgrade of the software not complete successfully.
The instructions for these software maintenance tasks with a mojoXact Plus that is
used with a third-party terminal, are provided in the sections below. For information
on software maintenance tasks when the mojoXact Plus is used with a Leica mojo3D,
refer to the Leica mojo3D User Manual.
11.1
Upgrading Software from Virtual Wrench
General informa-
tion
A new version of software, if available, can be downloaded from Virtual Wrench™ to
the mojoXact Plus.
ƽ
CAUTION
Do not turn the mojoXact Plus off while the software upgrade is in progress.
Downloading soft-
ware, step-by-step
To download a new version of software from Virtual Wrench™, carry out the
following steps:
1. On the main navigation screen, select the Settings button.
The Settings menu appears.
2. Select the Software Settings button.
The Software Settings menu appears.
3. Select the Update Software from Virtual Wrench button.