Leica Geosystems Leica mojoXact Plus - Manual (Page 121)

Leica mojoXact Plus, System Information and Errors 121
9.6 Error Notifications
Overview The mojoXact Plus handles errors in different ways depending on the type of the
error and when it occurs during operation. The system has three error types:
Details of errors can be displayed by following the directions below.
Viewing errors,
step-by-step To view the list of active errors, carry out the following steps:
Critical Errors - Errors that block operation of the system and must be
resolved before normal operation can resume. These errors
pop-up on the screen when they occur.
Non-critical Errors - Errors that appear at the bottom of the screen in the error bar
and in the active errors list. Operation can continue but perfor-
mance could be degraded until these errors are resolved.
Setting Errors - Errors that arise from selecting incompatible settings. A
message appears on the screen and you cannot progress with
the setup until compatible settings are entered.
1. On the main navigation screen, select the Service button.
The Service menu appears.
2. Select the Errors button.
The Active Errors screen appears with a list of all the active errors.
3. From the list, select the error you wish to investigate.
4. To view the details of the selected error, select .
To return to the Service menu, select .