Leica Geosystems Leica mojoXact Plus - Manual (Page 77)

Leica mojoXact Plus, Correction Sources 77
6.2 Network RTK
Overview A mojoXact Plus can utilise a network of permanent base stations operated by a
network provider by using the Network RTK feature. This means there is no need for
a local base station.
Benefits Network RTK offers very quick convergence times compared to other correction
sources available. The Network RTK base stations are survey quality and mounted in
fixed positions, offering repeatability from year to year.
Limitations Network RTK can only be used when a good connection to the internet is present.
For an internet connection to be possible, the following must have occurred:
• The cell modem’s SIM Card must be installed correctly and you must have a data
plan for the SIM Card. Refer to Section "2.4 SIM Card Installation".
• The cell modem must be set up with the information provided by the data plan
provider. Refer to Section "3.6.2 Cell Modem Settings".
• If an external modem is being used, it must be connected to the ethernet cable
on the power harness.
To check that you have an internet connection
• Check the Cell Modem icon that displays in the Information Area at the bottom
of the main navigation screen. indicates a successful connection with good
signal strength, indicates that the connection is successful but the signal
strength is poor and indicates that the connection was not successful.
• Check that the errors list does not contain the "No internet available" error. Refer
to Section "9.6 Error Notifications".
• Check that the cell modem (including its cable) is not damaged and is connected
to the mojoXact Plus.
In order to use Network RTK, it is necessary to be within the bounds of the network
being used. Only correction streams providing CMR, CMR+ or RTCM 3 format correc-
tions are supported. GLONASS is only supported with the RTCM 3 format.

Before a mojoXact Plus can be configured to use Network RTK, unlock
codes are required for a Network Upgrade and a Network Data Plan.
Contact your dealer to obtain the required redeeming vouchers.
Loading unlock
codes onto the
mojoXact Plus There are two ways that the unlock codes can be loaded onto the mojoXact Plus:
1. Connect the mojoXact Plus to Virtual Wrench (refer to Chapter "10 Virtual Wrench
Remote Service").
Once connected, the new codes are automatically loaded onto the
mojoXact Plus.
OR
2. Enter the codes manually via the mojoXact Plus, as described in Section "3.7
Feature Unlock".