Leica Geosystems Leica mojoXact Plus User Manual
Page 83
Leica mojoXact Plus, Correction Sources
83
7. If all details are entered correctly, the system attempts to connect to the correc-
tion source. This may take some time and if successful the Correction Source
Status screen appears with a
in front of Receiving Correction Data and a
status bar indicating the strength of the connection.
8. If the connection is successful, select
to proceed to the GL1DE
TM
Fallback
screen.
If the connection is not successful (indicated by a
in front of Receiving
Correction Data), select the
button to go back and make the necessary
changes. You can proceed to the GL1DE
TM
Fallback screen; that is, you are not
forced to fix the connection problem, although it is recommended that you do.
If the connection is not successful:
• Check that the Internal Radio settings (Channel and Reference Format) match
these same settings on the base station.
• Check that the radio (whip) antenna mounted on the GPS antenna on the
vehicle’s cab, has line of sight with the base station and this is not obstructed
by buildings, trees, etc.
• Check the radio (whip) antenna for damage.
• Check that the base station is turned on, receiving GPS data and has a position
fix.