1 configuring nmea output, 1 nmea 0183 setup, Configuring nmea output – Leica Geosystems Leica mojoXact Plus User Manual
Page 107: Nmea 0183 setup
Leica mojoXact Plus, NMEA Output
107
8.1
Configuring NMEA Output
Overview
The mojoXact Plus supports:
•
the output of NMEA 0183 data.
•
logging NMEA 0183 data to a USB memory key.
•
the output of NMEA 2000 data.
All of these options can be selected together, but normal operation is to select one
option.
8.1.1
NMEA 0183 Setup
To configure the NMEA 0183 settings, carry out the following steps:
4. On the NMEA Settings screen select the Output NMEA 0183 checkbox.
5. To proceed to the NMEA 0183 Settings screen, select
.
The NMEA 0183 Settings screen appears.
1. At the main navigation screen, select the Settings button.
The Settings menu appears.
2. On the Settings menu, select the System Settings button.
The System Settings menu appears.
3. On the System Settings menu, select the NMEA Settings button.
The NMEA Settings screen appears.