Leica Geosystems Leica mojoXact Plus - Manual (Page 91)

Leica mojoXact Plus, Guidance 91
Setting A-B
waypoints, step-
by-step To set A-B waypoints, carry out the following steps:
1. On the main navigation screen, select the Guidance button.
The Guidance menu appears.
2. Select the Set AB button.
The Set AB menu appears.
3. Position your vehicle in the field where you want to start (waypoint
A), and select the Set A button.
The main navigation area of the screen shows where the starting
waypoint is. The end waypoint (B) is grey indicating that the vehicle
has not travelled far enough yet to set it.
4. Drive to your desired endpoint in the field (waypoint B), then select
the Set B button.

The Set B button remains greyed out until the minimum
distance between waypoints A and B is travelled. The
minimum distance is 30 meters (100 feet). The greater the
distance between the waypoints, the better the accuracy of
the working line. Where possible, set the waypoints at either
end of the field.
The Save Wayline dialog box appears.